Analogix and Synopsys Prove SERDES Interoperability at 6.25 Gigabits Over Tyco Electronics 'Legacy' Backplane

World's First Demonstrated Interoperability of SERDES Solutions Designed to Support Next-Generation Interconnect Standards

SANTA CLARA, Calif., Oct. 19, 2004 - Analogix Semiconductor and Synopsys, Inc. (Nasdaq:SNPS), the world leader in semiconductor design software, have successfully completed interoperability testing of their SERDES (serializer-deserializer) solutions over Tyco Electronics' HM-Zd Legacy Backplane System, a reference platform that uses standard, inexpensive FR-4 circuit-board material. The Analogix and Synopsys SERDES were able to maintain sustained error-free full-duplex communication at rates up to 6.25 gigabits per second over trace distances of more than 40 inches of standard FR-4 backplane material. Proven interoperability provides system designers with increased flexibility in designing the most efficient, lowest-cost systems possible.

The demonstration is the first to prove the multi-vendor interoperability of SERDES solutions that are designed to support next-generation interconnect standards, including the OIF CEI-6G Long Reach Interoperability Agreement, Next-generation Rapid I/O, Serial ATA (SATA), Serial Attached SCSI (SAS), and PCI Express Generation 2.

The two devices tested were Analogix's D-PHY 4x5G, a discrete backplane transceiver capable of 1.25- to 6.25-Gbps transmission; and an ASIC containing a Synopsys 6.25-Gbps SERDES, a Decision Feedback Equalization (DFE)-enabled NRZ (binary) core capable of 622-Mbps to 6.25-Gbps transmission. The two interoperated over Tyco Electronics' Legacy HM-Zd backplane.

"Standards efforts are critical in accelerating the process by which different vendors achieve interoperability," said Ted Rado, Analogix vice president of marketing. "But, with the design complexities of leading-edge, high-speed technologies, meeting standards often is not sufficient - especially when those standards are still early in the specification stage. Multi-vendor testing is key to providing the proof of device compatibility that customers want."

"Highly interoperable and reusable standards-based mixed-signal IP cores are essential to enable adoption of faster interconnect solutions up to 6.25 Gbps and beyond," said Bill Hoppin, DesignWare? Mixed-signal IP Business Development at Synopsys. "This interoperability demonstration gives designers confidence that our DesignWare SERDES technology has the robustness and margin needed to achieve true interoperability at 6.25 Gbps over difficult backplane applications."

John D'Ambrosia, manager of semiconductor relations at Tyco Electronics, said, "The HM-Zd Legacy backplane was designed to rigorously test emerging 6.25-Gbps devices in an environment that is representative of copper-based backplanes in the field today. This test shows that SERDES solutions from Synopsys and Analogix can deal with problems such as reduced signal-to-noise ratios that emerge at speeds of 5 gigabits and up, and that they can do so while communicating with each other over a single backplane."

Interoperability Test Details
In the test, conducted at Analogix, PRBS 31 (pseudorandom bit sequence) unencoded data ran at 6.25 Gbps. The Analogix D-PHY 5G transmitter drove the Synopsys receiver and vice versa, realizing 50 Gbps over four full-duplex, 40-plus-inch FR-4 links (30-inch backplane trace plus six-inch line-card trace plus six-inch evaluation-board trace). The devices were operated in both synchronous and asynchronous modes. The test ran error-free, validating bit error rates (BER) of 10-15 or better, and, using diagnostic capability integrated into the Synopsys core, extrapolated BER to greater than 10-18.

Tyco Electronics' HM-Zd Legacy Backplane System, introduced in July 2003, provides a common, defined environment for interoperability and performance testing of solutions for designs using low-voltage differential signaling. Based on Nelco 4000-6 material, it provides 16 full-duplex paths per three channel lengths of 1, 16 and 30 inches, and implements differential pairs based on a .006-inch trace width. Furthermore, to mirror implementations in the field today, no stub removal techniques, such as backdrilling, have been implemented in the connector area.

Analogix's D-PHY family of backplane transceivers uses advanced analog signal conditioning techniques to eliminate the signal-integrity problems that characterize high-speed data transmission over copper media. D-PHY products drive increased performance through existing backplane traces while interoperating with existing line cards. The D-PHY family is designed for use in enterprise switches and routers, carrier-class transport equipment, Fibre Channel and IP-based storage systems, and high-end servers.

About Tyco Electronics
Tyco Electronics, a major business segment of Tyco International Ltd., is the world's largest passive electronic components manufacturer; a world leader in cutting-edge wireless, active fiber-optic and complete power systems technologies; and is also rapidly developing extensive networking and building technology installation services. Tyco Electronics provides advanced technology products from over 40 well-known and respected brands, including Agastat, Alcoswitch, AMP, AMP NETCONNECT, Buchanan, CII, CoEv, Critchley, Elcon, Elo TouchSystems, M/A-COM, Madison Cable, OEG, OneSource Building Technologies, Potter & Brumfield, Raychem, Schrack, Simel and TDI Batteries.

About Synopsys
Synopsys, Inc., is the world leader in electronic design automation (EDA) software for semiconductor design. The company delivers technology-leading semiconductor design and verification platforms and IC manufacturing software products to the global electronics market, enabling the development and production of complex systems-on-chips (SoCs). Synopsys also provides intellectual property and design services to simplify the design process and accelerate time-to-market for its customers. Synopsys is headquartered in Mountain View, Calif., and has offices in more than 60 locations throughout North America, Europe, Japan and Asia. Visit Synopsys online at http://www.synopsys.com/. Information on DesignWare IP products is available online at http://www.synopsys.com/designware.

About Analogix Semiconductor
Analogix Semiconductor, Inc., founded in March 2002, manufactures high-performance analog mixed-signal semiconductors. Initial products are high-speed physical-layer transceivers (SERDES) that extend the performance and reach of backplane and system-to-system interconnect over copper media. Analogix products combine advanced analog with digital signal processing (DSP) techniques to offer interconnect speeds of up to 10Gbps. Target customers include enterprise and carrier networking, storage and server system vendors. Analogix is based in Santa Clara, Calif., with development offices in Beijing, China. The privately-held company, which has 40 employees, has raised $10 million from Woodside Fund, DCM - Doll Capital Management, and IDG Technology Venture Investment. For more information, visit http://www.analogix.com.

Synopsys and DesignWare are registered trademarks of Synopsys, Inc.

Contact Information
Ted Rado
trado@analogixsemi.com
Tel: 408-988-8848 x203

© 2005, Analogix Semiconductor, Inc. All rights reserved.