ANX7412

ANX7412

USB-C Port Controller with Power Delivery
USB-C
USB-C™ Port Controller
Overview: 

ANX7412 is a USB Type-C™ (USB-C) Port Controller that complies with the latest USB-C (r1.2) and USB-PD v3.0 (r1.0) specifications. ANX7412 integrates the logic to manage cable attach and detach, orientation, and role detection. The onchip microcontroller (OCM) facilitates USB-PD v3.0 messaging for fast charging, DisplayPort™ (DP) Alternate Mode (Alt Mode), and Vendor-Defined Messages (VDMs). ANX7412 integrates the MOSFETs for powering VCONN and the signals required to control external VBUS load switches. ANX7412 can be configured as a Downstream Facing Port (DFP) or a Dual- Role Port (DRP), making it an ideal solution for USB-C receiver ports such as dongles, docks, HDTV, monitors, and projectors. ANX7412 supports a TCPC-compliant register interface and utilizes its I2C Slave port for communication with an upstream embedded controller, CPU, or AP. ANX7412 is powered from a single flexible supply rail at 3.3V and is available in small QFN packages.

Main Features: 
Other Features
  • TCPC-compliant hardware interface
  • Supports DFP and DRP modes for Host-only or Dual-Role applications
  • Integrated VCONN FETs
  • Built-in 10-bit ADC to monitor VBUS voltage and current
  • Integrated Billboard
  • Dedicated control signals for VBUS Source FET, VBUS sink FET, and VBUS auto discharge circuity
  • Serial and debug interfaces
    • I2C Master/Slave interface
  • Industry standard compatibility
    • USB Type-C r1.2 specification
    • USB Power Delivery v3.0 r1.0 specification
    • DisplayPort 1.4 specification
    • DisplayPort Alternate Mode over USB Type-C r1.1 specification
    • Universal Serial Bus (USB) Type-C Port Controller Interface r1.0 specification
  • Low-power design
    • Single supply at 3.3V
    • Dedicated supply power pin for flexible I/O power — 1.8V or 3.3V
    • Ultra-low power consumption (typical 77uW) in standby mode
  • On-chip microcontroller with reprogrammable memory for USB-PD v3.0 engine
    • 64K bytes SRAM for firmware execution
    • 128K bytes Flash for firmware storage
    • PDFU function for firmware updating
  • Dead battery detection support
  • Package
    • QFN-28, 4mm x 4mm, 0.8mm Z-height, 0.4mm pin-pitch
Applications: 

Display/Panel

Docking Station

Adapters

Package: 
  • QFN-28, 4mm x 4mm, 0.8mm Z-height, 0.4mm pin-pitch
Detailed Product Information: 

I2C