1ch

ANX7433

Re-timers/Repeaters
USB-C
Signal Conditioners and Multiplexors
Overview: 

ANX7433 is a USB 3.2 Gen2 10G active mux with integrated re-timer and CC Detection capable of recovering the USB signals with loss compensation of up to 23dB. ANX7433 also integrates a mux (1x2) for USB Type-C™ (USB-C™) applications. ANX7433 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 operation. Host (source) USB-C data-only applications are fully supported by ANX7433 with built-in intelligent switching. With the intelligent digital switching, ANX7433 ensures the enhanced signals from the re-timers are preserved and outputted over the USB-C connector.

Main Features: 
Other Features
  • Built-in re-timer
    • Integrated re-timer for USB 3.2 up to Gen2 @ 10Gbps
    • Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification (Appendix-E)
    • Loss compensation to recover up to 23dB channel loss
  • Integrated mux
    • Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector
    • Mux control input through I2C commands from external I2C master
  • TCPC-compliant hardware interface
  • Supports DFP USB-C applications
  • Dedicated control signals for VBUS Source FET
  • Integrated Reference CLK
  • Serial and debug interfaces
    • I2C Slave interface, up to 1MHz, for mux and retimer configuration
  • Industry standard compatibility
    • USB 3.2 specification, Appendix E
    • USB Type-C r1.2 specification
    • Intel USB 3.2 Repeater and Active Switch specification
  • Low-power design
    • Analog power supply at 1.8V
    • I/O power supply at 1.8V
    • Core power supply at 1.2V
  • Package
    • QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
  • Commercial temperature range of 0C to 70C
Applications: 

Notebook/Desktop PC

Storage/Server

Package: 

2-Ch, USB Type-C, 1-Ch, USB 3.2 Gen 2

Detailed Product Information: 

ANX7491

Re-timers/Repeaters
USB-C
10G USB 3.2 Re-timer (1-Port)
Overview: 

ANX7491 is a 1-port USB 3.2 re-timer capable of conditioning USB signals at both Gen 1 (5Gbps) and Gen 2 (10Gbps) speeds. ANX7491 can compensate signal loss of up to 23dB and is compliant to the latest USB 3.2 specifications. ANX7491 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 operation. Host (source) and device (sink) Type-A data-only applications are fully supported by ANX7491. ANX7491 supports integrated reference clock and is protocol aware for efficient USB link power management and power savings. ANX7491 can be in various types of applications such as notebook/desktop PCs, server, and accessories/docks with various USB connectors such as Type-A or Type-B. 

Main Features: 
Other Features

Features  

  • Built-in re-timer
    • Integrated re-timer for USB 3.2 1-port (Tx/Rx) up to 10Gbps
    • Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB3.1 Specification (Appendix-E)
    • Loss compensation to recover up to 23dB channel loss
  • Protocol awareness for better link power management (LPM) and savings
  • Supports both host and device applications in USB3.2 Type-A subsystems
  • Integrated Reference Clock
  • Serial and debug interfaces
    • I2C Slave interface, up to 1MHz, for re-timer configuration 
  • Industry standard compatibility
    • USB 3.2 specification, Appendix E
    • Intel USB 3.2 Repeater and Active Switch specification
  • Low-power design
    • Analog power supply at 1.8V
    • I/O power supply at 1.8V
    • Core power supply at 1.2V
  • Package
    • QFN-36, 4.2mm x 4.9mm, 0.90mm Z-height, 0.35mm pin-pitch
  • Commercial temperature range of OC to 70C 
Applications: 

Notebook/Desktop PC

Package: 

QFN-36, 4.2mm x 4.9mm, 0.90mm Z-height, 0.35mm pin-pitch 

Detailed Product Information: 

ANX7443

6:4 Re-timer Mux
USB-C
10G Active Mux (6x4) with Integrated Re-timers for USB3.2/DisplayPortl.4
Overview: 

ANX7443 is a re-timing mux capable of switching DisplayPort (DP) and USB3.2 Gen 2 10Gbps signals to support a single USB Type-CTM (USB-CTM) port. ANX7443 has built-in re-timers to recover both the USB and DP signals with loss compensation of 23dB for USB and up to 27dB for DP. ANX7443 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timer eliminates jitter transfer and guarantee Gen 2 high-speed operation. Host (source) and device (sink) applications are fully supported by ANX7443 with built-in intelligent switching. With the intelligent digital switching, ANX7443 ensures the enhanced signals from the re-timers are preserved and outputted over the USB-C connector. ANX7443 integrates the local reference clock and SBU/AUX mux for switching DP AUX signals and reducing overall system BOM cost. 

Main Features: 
Other Features

Features 

  • Built-in re-timers 
    • Integrated re-timers for USB3.2 up to Gen 2 @ 10Gbps
    • Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB3.2 Specification (Appendix-E)
    • Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps. Supports both transparent mode and non-transparent mode (transparent or LTTPR)
    • Supports both host (source) and device (sink) applications in USB-C subsystems
    • Loss compensation to recover up to 23dB channel loss (USB), up to 27dB (DP)
  • Integrated mux
    • Integrated (6x4) mux switches USB and DP signals and preserves enhanced signal output over USB-C connector
    • Mux control input through I2C commands from external I2C master (or, optionally through GPIO of FLIP/USB_EN/DP_EN pins)
    • Integrated SBU/AUX mux for switching DisplayPort AUX +/- signals 
  • Integrated reference clock
  • Serial control interfaces
    • I2C Slave interface, up to 1MHz, for mux and re-timer configuration
  • Industry standard compatibility
    • USB3.2 specification, Appendix E
    • DisplayPort 1.4a specification
    • USB Type-C r1.2 specification
    • Intel USB3.2 Repeater and Active Switch specification
  • Low-power design
    • Analog power supply at 1.8V
    • I/O power supply at 1.8V
    • Core power supply at 1.2V
  • Package
    • QFN-60, 6.4mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
  • Commercial temperature range of OC to 70C 
Applications: 

Notebook/Desktop PC

Package: 

QFN-60, 6.4mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch 

Detailed Product Information: 

ANX7431

Re-timers/Repeaters
USB-C
10G Active Mux (1x2) with Integrated Re-timer for USB 3.2
Overview: 

ANX7431 is a USB3.2 Gen2 10G active mux with integrated re-timer capable of recovering the USB signals with loss compensation of up to 23dB. ANX7431 also integrates a mux (lx2) for USB Type-C™ (USB-C™ ) applications. ANX7431 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 operation. Host (source) and device (sink) USB-C data-only applications are fully supported by ANX7431 with built-in intelligent switching. With the intelligent digital switching, ANX7431 ensures the enhanced signals from the re-timers are preserved and outputted over the USB-C connector. 

Main Features: 
Other Features

Features

  • Built-in re-timer
    • Integrated re-timer for USB 3.2 up to Gen2 @ 10Gbps
    • Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification (Appendix-El
    • Supports both host (source) and device (sink) applications in USB-C subsystems
    • Loss compensation to recover up to 23dB channel loss
  • Integrated mux
    • Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector
    • Mux control input through 12C commands from external 12C master (or, optionally through FLIP/USB_EN pins)
  • Integrated Reference CLK
  • Serial and debug interfaces
    • I2C Slave interface, up to 1MHz, for mux and re-timer configuration
  • Industry standard compatibility
    • USB 3.2 specification, Appendix E
    • USB Type-C rl.2 specification
    • Intel USB 3.2 Repeater and Active Switch specification
  • Low-power design 
    • Analog power supply at 1.8V 1/0 power supply at 1.8V
    • Core power supply at 1.2V
  • Package
    • QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
  • Commercial temperature range of OC to 70C
Applications: 

Accessories

Notebook/Desktop PC

Package: 

QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch

Detailed Product Information: 

ANX7737

Converters/Bridges
USB-C
DisplayPort™ to HDMI® (Ultra-HD, 4K) Converter
Overview: 

The ANX7737 is a DisplayPort (DP) to HDMI (up to Ultra-HD, 4K using HBR2.5) converter, which includes 3D display delivery capability. It is designed to interoperate with any other DisplayPort enabled transmitter, with a maximum resolution of FullHD including 3D display, in smartphones, tablets, Ultrabooks, sports cameras, camcorders, and set top boxes. ANX7737 can support up to HBR2.5 in conjunction with an Analogix 4K transmitter. ANX7737 transforms the DisplayPort output of a source device to HDMI or DVI output so that the device can connect to any high-definition TV, monitor, or projector.

Main Features: 
  • Standard compliance
    •  DisplayPort, HDMI, HDCP
  • DisplayPort receiver
    • 1-lane DisplayPort1.2 input with link speed of RBR (1.62Gbps), HBR (2.7Gbps), HBR2 (5.4Gbps), and HBR2.5 (6.75Gbps)
    • Advanced WideEyeTM SerDes technology capable of receiving data over long and low quality cables
    • Stereo (3D) video support
    • HDCP content protection
  •  HDMI transmitter
    • Supports all HDMI 1.4b 4K resolutions, in conjunction with an Analogix 4K transmitter, including 3840x2160@30Hz and 4096x2160@24Hz video formats
    • Up to 36bpp color depth support at Full-HD
    • 3D video output support for all HDMI 1.4b 3D modes
    • Remote control support through Consumer Electronics Control (CEC)
    • HDCP version 1.4 and 2.2 pass-through content protection
  • System operation
    • On-chip Microcontroller (OCM)
    • Slave I2C device control interface
    • Master I2C device control interface available on
  • DisplayPort CONFIG signals
    • Built-in video test pattern generator
    • Power requirements
  • 1.0V and 1.8V power supplies
    • Package offered: 64-pin QFN, 8mm x 8mm, 0.4mm pin-pitch
    • RoHS compliant and Halogen free package 
Applications: 

Accessories

Notebook/Desktop PC

Smartphone/Tablet

Package: 
  • 64-pin QFN, 8mm x 8mm, 0.4mm pin-pitch
Standards Compliance: 

HDMI

HDCP

DisplayPort

Power Requirements: 
  • 1.0V and 1.8V
Detailed Product Information: 

ANX7750

Converters/Bridges
USB-C
SlimPort® to DisplayPort™ (4K@30Hz) Converter
Overview: 

The ANX7750 is a SlimPort to DisplayPort lane converter. It takes a 1-lane SlimPort (@HBR2.5 rate) input and converts it to 4-lane DisplayPort (@HBR rate) output. ANX7750 works in conjunction with SlimPort transmitters, such as ANX7805, ANX7808, ANX7812, ANX7814, ANX7816, ANX7836, and more. ANX7750 is particularly suited for seamless plug-and-play to legacy DisplayPort (@HBR rate) HDTV, monitors, and projectors.

Main Features: 
  • Standard compliance
    • DisplayPort, MyDP, HDCP
  • SlimPort/MyDP/DisplayPort receiver
    • 1-lane high-speed differential input with configurable speed: HBR2.5, HBR2, HBR, or RBR
    • Video up to 4K@30Hz resolution
    • Spread Spectrum Clocking (SSC) support
    • Stereo (3D) video input support  Single wire AUXP (C-WIRE) sideband communication
    • HDCP content protection
  • DisplayPort transmitter
    • 1-, 2-, or 4-lane high-speed differential output with configurable speed: HBR or RBR
    • Stereo (3D) video input support
    • HDCP content protection
  • System operation
    • Integrated On-chip Microcontroller (OCM) for software free operation
    • Slave I2C device control interface
  • Power requirements
    • 3.3V, 1.8V, and 1.0V
  • Package offered: 88-QFN, 0.4mm pin pitch
  • RoHS compliant and Halogen free package
Applications: 

Accessories

Standards Compliance: 

MyDP

HDCP

DisplayPort

Detailed Product Information: 

ANX7805

Converters/Bridges
MIPI to DP Transmitters
SlimPort® Transmitter
Main Features: 
  • Standard compliance
    • DisplayPort 1.2, MyDP 1.0, MIPI-DSI 1.0
  • USB data in/out
    • USB host, device, or OTG data passes through by default
    • Meets requirements of inter-chip USB specification
  • Digital video and audio output
    • SlimPort output over mini- or micro-USB connector
    • DisplayPort, eDP, or MyDP output over any connector
    • Configurable 1-lane output supports: 5.4Gbps, 2.7Gbps, or 1.62Gbps data rates
    • Stereo (3D) video output support
    • Single wire (C-WIRE) sideband communication
    • Integrated CEC Support
    • HDCP 1.3 content protection (optional)
  • Integrated analog switch and accessory detect
    • Seamless switching between USB and MyDP
    • SlimPort cable detect with FAIL-SAFE mechanism
  • Digital video input
    • RGB-24 single data rate or 18-bits double data rate
    • MIPI-DSI (4-lanes) at 1Gbps/lane
    • Supports max pixel clock rates up to 185 Mpixels/sec
    • Up to 30 bpp color depth support in SlimPort mode
    • Supports 1.8V RGB-24 input mode
  • Digital audio input
    • SLIMbus, S/PDIF and 8-Ch I2S input
    • Audio sample rates 32 kHz to 192 kHz
  • System operation
    • Slave I2C device control interface
    • Built-in video BIST patterns and audio tone generator for system self-test
  • Power requirements
    • 1.0V, 1.8V, and 3.3V power supplies
    • Standby Power: < 25uW, while monitoring cable detect
  • Package offered: 81-ball, 4mm x 4mm, 0.4mm ball pitch 
Applications: 

Accessories

Notebook/Desktop PC

Smartphone/Tablet

Standards Compliance: 

MyDP 1.0

MIPI-DSI 1.0

DisplayPort 1.2

Detailed Product Information: 

ANX6210

Converters/Bridges
DisplayPort
DisplayPort™ 1.2 to VGA Converter
Overview: 

ANX6210 is a DisplayPort to VGA converter designed for motherboards. With its single HRB2 lane, ANX6210 can support WDXGA (2048x1152) as its max resolution. Its on-chip MCU and memory eliminates the needs for any external configuration or setup. It automatically directs the DisplayPort output from the PC or mobile phone to VGA, effectively working with all types of legacy monitors, projectors, and TVs. ANX6210 supports a single 3.3V power supply with an integrated 1V low-dropout (LDO) regulator.

Main Features: 
VGA Output
  • Supports resolutions up to WDXGA (2048x1152@60Hz,24bpp)
  • VGA output meets VESA VSIS v1r2 clock jitter specification
  • VGA DAC work range is up to 270 MHz
  • Low power standby mode with automatic monitor plug and unplug detect
  • Powered from DisplayPort source
  • EDID and MCCS pass-through support
DisplayPort Input
  • DisplayPort 1.2 compliant receiver
  • VESA® compliant eDP v1.3 receiver
  • 1 lane high-speed differential input with configurable speed: 5.4Gbps, 2.7Gbps, or 1.62Gbps
Optimized for motherboard design
  • With 1.0 LDO on, single 3.3V power supply supported
  • Super low power consumption: 480mW active power (1080p@60Hz, 1V LDO powered on)
  • Standby power: 8mW with 1V LDO off
System Operation
  • -10°C to +75°C operating temperature
  • MCU controlling external components
Applications: 

Automotive

Notebook/Desktop PC

Package: 

5x5mm, 40-Pin QFN package

Standards Compliance: 

DisplayPort 1.2

eDP 1.3

Power Requirements: 
  • Single 3.3V power supply supported
Detailed Product Information: 

ANX1121

Converters/Bridges
DisplayPort
Low Cost DisplayPort™ to LVDS Converter
Overview: 

ANX1121 is a low cost high quality DisplayPort to LVDS converter offering up to 18-bits per pixel and single channel LVDS output support. It provides a bridge between DisplayPort-enabled next generation source devices (such as GPUs) and existing LVDS displays. Featuring low power and EMI reduction techniques, combined with its low cost and small form factor, it is ideal for motherboards and other systems with embedded displays.

Main Features: 
VESA Compliant DisplayPort™ 1.1a Receiver
  • Configurable 1 lane operation 
  • 1.62/2.7Gbps data rate support 
  • AUX channel link up to 1Mbps bandwidth 
  • All DisplayPort receiver side registers accessible by the AUX channel and I2C slave interface 
  • Spread spectrum clock (SSC) support for improved EMI performance
Single channel LVDS output
  • Single Channel: Up to 120 MHz pixel clock 
  • Up to 18-bits per pixel 
Video Modes
  • Up to 1680 x 1050@60Hz 
  • 18 bits per pixel support 
LVDS Spread Spectrum Clocking for reduced EMI
On-chip ring oscillator, no external clock required
Low BOM cost, no local MCU required
  • Fully controllable via DisplayPort Tx through AUX channel 
Low power design supporting several power saving modes
Applications: 

Automotive

Notebook/Desktop PC

Package: 
  • 36-pin QFN (6mm x 6mm)
Standards Compliance: 

RoHS Compliant and Halogen Free

DisplayPort 1.1a

Power Requirements: 
  • Selectable 3.3 / 1.2V or 2.5 / 1.2V operation
Detailed Product Information: 

ANX7738

Converters/Bridges
DisplayPort
SlimPort®to HDMI® (Ultra-HD, 4K) Converter
Overview: 

The ANX7738 is a SlimPort to HDMI (up to Ultra-HD, 4K in Turbo mode) converter, which includes 3D display delivery capability.Also, it is designed to interoperate with any other MyDP or DisplayPort™ enabled transmitter,with a maximum resolution of Full-HD including 3D display, in ultrathin notebooks, tablets, smartphones, camcorders, and digital still cameras. ANX7738works in conjunction with MyDP/DisplayPort transmitters, such as the ANX7812, ANX7814, ANX7816, and more. ANX7738 transforms the MyDP/DisplayPort or SlimPort (Turbo mode) output of a source device to HDMI or DVI output so that the device can connect to any high-definition TV, monitor, or projector.

Main Features: 
HDMI Transmitter
  • Connects to any HDMI receiver
  • Max TMDS link rate up to 300Mpixels/sec
  • Up to 36bpp color depth support at Full-HD
  • 3D video output support
  • Remote control support through Consumer Electronics Control (CEC)
  • HDCP content protection
SlimPort/MyDP/DisplayPort Receiver
  • SlimPort (Turbo mode) DisplayPort or MyDP input
  • Configurable 1-lane input supports: Turbo mode, HBR2, HBR, and RBR data rates
  • Advanced WideEye™ SerDes technology capable of receiving data over long and low quality cables
  • Spread Spectrum Clocking (SSC) support
  • Stereo (3D) video input support
  • Single wire AUXP (C-WIRE) sideband communication
  • Integrated remote control support
  • HDCP content protection
System Operation
  • Integrated On-chip Microcontroller (OCM) for software free operation
  • Slave I2Cdevice control interface
  • Built-in video test pattern generator
Applications: 

Accessories

Notebook/Desktop PC

Smartphone/Tablet

Package: 
  • 64-pin QFN, 8mm x 8mm, 0.4mm pin-pitch
Standards Compliance: 

MyDP

RoHS Compliant and Halogen Free

HDMI

HDCP

DisplayPort

Power Requirements: 
  • 1.0V and 1.8V
  • 3.3V input requirement eliminated by an integrated boost regulator
  • Standby power: <20mW, while monitoring cable detection
Detailed Product Information: