1ch

ANX7491

Re-timers/Repeaters
USB-C
10G USB 3.2 Re-timer (1-Port)
Overview: 

ANX7491 is a 1-port USB 3.2 re-timer capable of conditioning USB signals at both Gen 1 (5Gbps) and Gen 2 (10Gbps) speeds. ANX7491 can compensate signal loss of up to 23dB and is compliant to the latest USB 3.2 specifications. ANX7491 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 operation. Host (source) and device (sink) Type-A data-only applications are fully supported by ANX7491. ANX7491 supports integrated reference clock and is protocol aware for efficient USB link power management and power savings. ANX7491 can be in various types of applications such as notebook/desktop PCs, server, and accessories/docks with various USB connectors such as Type-A or Type-B. 

Main Features: 
Other Features

Features  

  • Built-in re-timer
    • Integrated re-timer for USB 3.2 1-port (Tx/Rx) up to 10Gbps
    • Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB3.1 Specification (Appendix-E)
    • Loss compensation to recover up to 23dB channel loss
  • Protocol awareness for better link power management (LPM) and savings
  • Supports both host and device applications in USB3.2 Type-A subsystems
  • Integrated Reference Clock
  • Serial and debug interfaces
    • I2C Slave interface, up to 1MHz, for re-timer configuration 
  • Industry standard compatibility
    • USB 3.2 specification, Appendix E
    • Intel USB 3.2 Repeater and Active Switch specification
  • Low-power design
    • Analog power supply at 1.8V
    • I/O power supply at 1.8V
    • Core power supply at 1.2V
  • Package
    • QFN-36, 4.2mm x 4.9mm, 0.90mm Z-height, 0.35mm pin-pitch
  • Commercial temperature range of OC to 70C 
Applications: 

笔记本/桌面PC

Package: 

QFN-36, 4.2mm x 4.9mm, 0.90mm Z-height, 0.35mm pin-pitch 

Detailed Product Information: 

ANX7805

Converters/Bridges
MIPI to DP Transmitters
SlimPort® Transmitter
Main Features: 
  • Standard compliance
    • DisplayPort 1.2, MyDP 1.0, MIPI-DSI 1.0
  • USB data in/out
    • USB host, device, or OTG data passes through by default
    • Meets requirements of inter-chip USB specification
  • Digital video and audio output
    • SlimPort output over mini- or micro-USB connector
    • DisplayPort, eDP, or MyDP output over any connector
    • Configurable 1-lane output supports: 5.4Gbps, 2.7Gbps, or 1.62Gbps data rates
    • Stereo (3D) video output support
    • Single wire (C-WIRE) sideband communication
    • Integrated CEC Support
    • HDCP 1.3 content protection (optional)
  • Integrated analog switch and accessory detect
    • Seamless switching between USB and MyDP
    • SlimPort cable detect with FAIL-SAFE mechanism
  • Digital video input
    • RGB-24 single data rate or 18-bits double data rate
    • MIPI-DSI (4-lanes) at 1Gbps/lane
    • Supports max pixel clock rates up to 185 Mpixels/sec
    • Up to 30 bpp color depth support in SlimPort mode
    • Supports 1.8V RGB-24 input mode
  • Digital audio input
    • SLIMbus, S/PDIF and 8-Ch I2S input
    • Audio sample rates 32 kHz to 192 kHz
  • System operation
    • Slave I2C device control interface
    • Built-in video BIST patterns and audio tone generator for system self-test
  • Power requirements
    • 1.0V, 1.8V, and 3.3V power supplies
    • Standby Power: < 25uW, while monitoring cable detect
  • Package offered: 81-ball, 4mm x 4mm, 0.4mm ball pitch 
Applications: 

配件

笔记本/桌面PC

智能手机/平板电脑

Standards Compliance: 

MyDP 1.0

MIPI-DSI 1.0

DisplayPort 1.2

Detailed Product Information: 

ANX7816

Converters/Bridges
HDMI to DP Transmitters
SlimPort® (Ultra-HD) Transmitter
Overview: 

The ANX7816 is an ultra-low power Ultra-HD (4096x2160p30) SlimPort transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7816 works in conjunction with any MyDP/DisplayPort™ receiver, such as the ANX7730, ANX7732, and more. The ANX7816 transforms the HDMI output of an application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, an appropriate MyDP to DisplayPort cable can connect to any DisplayPort receiver. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.

Main Features: 
USB Data In/Out
  • USB host, device or OTG data passes through by default
  • Meets Inter-Chip USB specification
SlimPort/MyDP/eDP/DisplayPort Transmitter
  • SlimPort output over mini- or micro-USB connector 
  • DisplayPort, eDP, or MyDP output over any connector 
  • Configurable 1-lane output supports: Turbo mode, HBR2, HBR, and RBR data rates 
  • Ultra-HD (3840x2160p30) or 4K (4096x2160p30) maximum video resolution 
  • Stereo (3D) video output support 
  • Single wire (C-WIRE) sideband communication 
  • Integrated remote control support 
  • HDCP content protection 
Integrated Analog Switch and Accessory Detection
  • Seamless switching between USB and MyDP
  • SlimPort cable detection with Fail-Safe mechanism
HDMI Receiver
  • Supports max pixel clock up to 300Mpixels/sec
  • Up to 36bpp color depth support at Full-HD
  • Up to 8 channels digital audio support
System Operation
  • Flexible ref clock: 19 MHz to 52 MHz
  • Slave I2C device control interface
  • Built-in video BIST for system self-test
Applications: 

配件

笔记本/桌面PC

智能手机/平板电脑

Package: 
  • VFBGA 64-ball
Standards Compliance: 

MyDP

RoHS Compliant and Halogen Free

HDMI

HDCP

DisplayPort

Power Requirements: 
  • 1.0V, 1.8V, and 3.3V 
  • Standby power: <45uW, while monitoring cable detection 
Detailed Product Information: 

ANX7814

Converters/Bridges
HDMI to DP Transmitters
SlimPort® (Full-HD) Transmitter
Overview: 

The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7814 works in conjunction with any MyDP/DisplayPort™ receiver, such as the ANX7730, ANX7732, and more. The ANX7814 transforms the HDMI output of an application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, an appropriate MyDP to DisplayPort cable can connect to any DisplayPort receiver. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.

Main Features: 
USB Data In/Out
  • USB host, device or OTG data passes through by default
  • Meets Inter-Chip USB specification
SlimPort/MyDP/eDP/DisplayPort Transmitter
  • SlimPort output over 5-pin mobile USB connector
  • DisplayPort, eDP, or MyDP output over any connector
  • Configurable 1-lane output supports: Turbo mode, HBR2, HBR, and RBR data rates
  • Full-HD (1080p60) or WUXGA (1920x1200p60) maximum video resolution
  • Stereo (3D) video output support
  • Single wire (C-WIRE) sideband communication
  • Integrated remote control support
  • HDCP content protection
Integrated Analog Switch and Accessory Detection
  • Seamless switching between USB and MyDP
  • SlimPort cable detection with Fail-Safe mechanism
HDMI Receiver
  • Supports max pixel clock up to 185Mpixels/sec
  • Up to 36bppcolor depth support
  • Up to 8 channels digital audio support
System Operation
  • Flexible ref clock: 19MHz to 52MHz
  • Slave I2Cdevice control interface
  • Built-in video BIST for system self-test
Applications: 

配件

笔记本/桌面PC

智能手机/平板电脑

Package: 
  • VFBGA
Standards Compliance: 

MyDP

RoHS Compliant and Halogen Free

HDMI

HDCP

DisplayPort

Power Requirements: 
  • 1.0V, 1.8V, and 3.3V
  • Standby power: <45uW, while monitoring cable detection
Detailed Product Information: 

ANX7812

Converters/Bridges
HDMI to DP Transmitters
SlimPort® (Full-HD) Transmitter
Overview: 

The ANX7812 is an ultra-low power Full-HD (1080p60) SlimPort transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7812 works in conjunction with any MyDP/DisplayPort™ receiver, such as the ANX7730, ANX7732, and more. The ANX7812 transforms the HDMI output of an application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, an appropriate MyDP to DisplayPort cable can connect to any DisplayPort receiver. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.

Main Features: 
USB Data In/Out
  • USB host, device or OTG data passes through by default
  • Meets Inter-Chip USB specification
SlimPort/MyDP/eDP/DisplayPort Transmitter
  • SlimPort output over 5-pin mobile USB connector
  • DisplayPort, eDP, or MyDP output over any connector
  • Configurable 1-lane output supports: Turbo mode, HBR2, HBR, and RBR data rates
  • Full-HD (1080p60) or WUXGA (1920x1200p60) maximum video resolution
  • Stereo (3D) video output support
  • Single wire (C-WIRE) sideband communication
  • Integrated remote control support
  • HDCP content protection
Integrated Analog Switch and Accessory Detection
  • Seamless switching between USB and MyDP
  • SlimPort cable detection with Fail-Safe mechanism
HDMI Receiver
  • Supports max pixel clock up to 185Mpixels/sec
  • Up to 36bppcolor depth support
  • Up to 8 channels digital audio support
System Operation
  • Flexible ref clock: 19MHz to 52MHz
  • Slave I2Cdevice control interface
  • Built-in video BIST for system self-test
Applications: 

配件

笔记本/桌面PC

智能手机/平板电脑

Package: 
  • VFBGA 49-ball
Standards Compliance: 

MyDP

RoHS Compliant and Halogen Free

HDMI

HDCP

DisplayPort

Power Requirements: 
  • 1.0V, 1.8V, and 3.3V
  • Standby power: <45uW, while monitoring cable detection
Detailed Product Information: 

ANX7808

Converters/Bridges
HDMI to DP Transmitters
SlimPort® Transmitter
Overview: 

The ANX7808 is an ultra-low power SlimPort® transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7808 works in conjunction with MyDP/DisplayPort™ receivers, such as the ANX7730 and ANX7732. The ANX7808 transforms the HDMI output of the mobile device’s application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, a passive MyDP to DisplayPort cable can connect to any DisplayPort connector. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.

Main Features: 
USB Data In/Out
  • USB host, device or OTG data passes through by default
  • Meets requirements of Inter-Chip USB specification
Digital Video and Audio Output
  • SlimPort output over mini or micro-USB connector
  • DisplayPort, eDP, or MyDP output over any connector
  • Configurable 1-lane output supports: 5.4Gbps, 2.7Gbps or 1.62Gbps data rates
  • Stereo (3D) video output support
  • Single Wire (C-WIRE) sideband communication
  • Integrated CEC Support
  • HDCP 1.3 content protection (optional)
Integrated Analog Switch
  • Seamless switching between USB and MyDP 
  • SlimPort® Cable detect with FAIL-SAFE mechanism
HDMI Receiver Input
  • HDMI 1.4b standard compliant
  • Supports max pixel clock rates up to 185Mpixels/sec
  • 30 bppcolor depth support in SlimPort mode
  • Up to 8 Channels audio support
System Operation
  • Slave I2C device control interface
  • Built-in video BIST patterns generator for system self-test
Applications: 

配件

笔记本/桌面PC

智能手机/平板电脑

Package: 
  • 49-ball VFBGA, 4.5mm X 4.5mm, 0.5mm ball pitch
Standards Compliance: 

MyDP 1.0

HDMI 1.4b

DisplayPort 1.2

Power Requirements: 
  • 1.0V, 1.8V and 3.3V power supply    
  • Standby Power: <  25µW
Detailed Product Information: