DisplayPort 1.2 (SlimPort)

ANX7678

Converters/Bridges
HDMI to DP Transmitters
HDMI to DisplayPort Bridge Controller
Overview: 

ANX7678 is an ultra-low power 4K Ultra-HD (4096x2160p60) SlimPort® transmitter designed for embedded applications, such as, virtual reality, docking stations, and other embedded DisplayPort™ applications with internal displays. The ANX7678 converts HDMI™ 2.0 to DisplayPort 1.3 Ultra-HD (4096x2160p60). Overall, the ANX7678 is designed to provide an internal DisplayPort connection between the HDMI interface and the internal DisplayPort panel. For virtual reality applications, the ANX7678 is a companion device to the ANX7530 (DisplayPort to Dual-MIPI) bridge converter.

Main Features: 
Other Features
  • Standard compliance
    • DisplayPort1.3, HDMI2.0/1.4b, HDCP 1.4 receiver
  • DisplayPort transmitter
    • DisplayPort transmitter (2-lanes @6.75Gbps)
    • Configurable 1-lane or 2-lane output supports: HBR2.5, HBR2, HBR, and RBR data rates
    • Ultra-HD (3840x2160p60) or 4K (4096x2160p60) maximum video resolution
    • Stereo (3D) video output support
    • AUXP and AUXN support
    • HDCP1.4 receiver support
  • HDMI 2.0 receiver
    • Supports max pixel clock rates up to 600 Mpixels/sec
    • Up to 36bpp color depth support
    • Up to Ultra-HD (3840x2160p60) or 4K (4096x2160p60) maximum video resolution
    • Up to 8-channels digital audio support
  • System operation
    • Reference input clock: 27MHz
    • Slave I2C device control interface
    • Built-in video BIST patterns and audio tone generator for system self-test
  • Power supply requirements
    • 1.0V, 1.8V, and 3.3V
  • Package: VFBGA
Applications: 

配件

VR/AR头戴设备

Package: 
  • VFBGA
Power Requirements: 
  • 1.0V, 1.8V, and 3.3V
Detailed Product Information: 

2ch

ANX7816

Converters/Bridges
HDMI to DP Transmitters
SlimPort® (Ultra-HD) Transmitter
Overview: 

The ANX7816 is an ultra-low power Ultra-HD (4096x2160p30) SlimPort transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7816 works in conjunction with any MyDP/DisplayPort™ receiver, such as the ANX7730, ANX7732, and more. The ANX7816 transforms the HDMI output of an application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, an appropriate MyDP to DisplayPort cable can connect to any DisplayPort receiver. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.

Main Features: 
USB Data In/Out
  • USB host, device or OTG data passes through by default
  • Meets Inter-Chip USB specification
SlimPort/MyDP/eDP/DisplayPort Transmitter
  • SlimPort output over mini- or micro-USB connector 
  • DisplayPort, eDP, or MyDP output over any connector 
  • Configurable 1-lane output supports: Turbo mode, HBR2, HBR, and RBR data rates 
  • Ultra-HD (3840x2160p30) or 4K (4096x2160p30) maximum video resolution 
  • Stereo (3D) video output support 
  • Single wire (C-WIRE) sideband communication 
  • Integrated remote control support 
  • HDCP content protection 
Integrated Analog Switch and Accessory Detection
  • Seamless switching between USB and MyDP
  • SlimPort cable detection with Fail-Safe mechanism
HDMI Receiver
  • Supports max pixel clock up to 300Mpixels/sec
  • Up to 36bpp color depth support at Full-HD
  • Up to 8 channels digital audio support
System Operation
  • Flexible ref clock: 19 MHz to 52 MHz
  • Slave I2C device control interface
  • Built-in video BIST for system self-test
Applications: 

配件

笔记本/桌面PC

智能手机/平板电脑

Package: 
  • VFBGA 64-ball
Standards Compliance: 

MyDP

RoHS Compliant and Halogen Free

HDMI

HDCP

DisplayPort

Power Requirements: 
  • 1.0V, 1.8V, and 3.3V 
  • Standby power: <45uW, while monitoring cable detection 
Detailed Product Information: 

ANX7814

Converters/Bridges
HDMI to DP Transmitters
SlimPort® (Full-HD) Transmitter
Overview: 

The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7814 works in conjunction with any MyDP/DisplayPort™ receiver, such as the ANX7730, ANX7732, and more. The ANX7814 transforms the HDMI output of an application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, an appropriate MyDP to DisplayPort cable can connect to any DisplayPort receiver. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.

Main Features: 
USB Data In/Out
  • USB host, device or OTG data passes through by default
  • Meets Inter-Chip USB specification
SlimPort/MyDP/eDP/DisplayPort Transmitter
  • SlimPort output over 5-pin mobile USB connector
  • DisplayPort, eDP, or MyDP output over any connector
  • Configurable 1-lane output supports: Turbo mode, HBR2, HBR, and RBR data rates
  • Full-HD (1080p60) or WUXGA (1920x1200p60) maximum video resolution
  • Stereo (3D) video output support
  • Single wire (C-WIRE) sideband communication
  • Integrated remote control support
  • HDCP content protection
Integrated Analog Switch and Accessory Detection
  • Seamless switching between USB and MyDP
  • SlimPort cable detection with Fail-Safe mechanism
HDMI Receiver
  • Supports max pixel clock up to 185Mpixels/sec
  • Up to 36bppcolor depth support
  • Up to 8 channels digital audio support
System Operation
  • Flexible ref clock: 19MHz to 52MHz
  • Slave I2Cdevice control interface
  • Built-in video BIST for system self-test
Applications: 

配件

笔记本/桌面PC

智能手机/平板电脑

Package: 
  • VFBGA
Standards Compliance: 

MyDP

RoHS Compliant and Halogen Free

HDMI

HDCP

DisplayPort

Power Requirements: 
  • 1.0V, 1.8V, and 3.3V
  • Standby power: <45uW, while monitoring cable detection
Detailed Product Information: 

ANX7812

Converters/Bridges
HDMI to DP Transmitters
SlimPort® (Full-HD) Transmitter
Overview: 

The ANX7812 is an ultra-low power Full-HD (1080p60) SlimPort transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7812 works in conjunction with any MyDP/DisplayPort™ receiver, such as the ANX7730, ANX7732, and more. The ANX7812 transforms the HDMI output of an application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, an appropriate MyDP to DisplayPort cable can connect to any DisplayPort receiver. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.

Main Features: 
USB Data In/Out
  • USB host, device or OTG data passes through by default
  • Meets Inter-Chip USB specification
SlimPort/MyDP/eDP/DisplayPort Transmitter
  • SlimPort output over 5-pin mobile USB connector
  • DisplayPort, eDP, or MyDP output over any connector
  • Configurable 1-lane output supports: Turbo mode, HBR2, HBR, and RBR data rates
  • Full-HD (1080p60) or WUXGA (1920x1200p60) maximum video resolution
  • Stereo (3D) video output support
  • Single wire (C-WIRE) sideband communication
  • Integrated remote control support
  • HDCP content protection
Integrated Analog Switch and Accessory Detection
  • Seamless switching between USB and MyDP
  • SlimPort cable detection with Fail-Safe mechanism
HDMI Receiver
  • Supports max pixel clock up to 185Mpixels/sec
  • Up to 36bppcolor depth support
  • Up to 8 channels digital audio support
System Operation
  • Flexible ref clock: 19MHz to 52MHz
  • Slave I2Cdevice control interface
  • Built-in video BIST for system self-test
Applications: 

配件

笔记本/桌面PC

智能手机/平板电脑

Package: 
  • VFBGA 49-ball
Standards Compliance: 

MyDP

RoHS Compliant and Halogen Free

HDMI

HDCP

DisplayPort

Power Requirements: 
  • 1.0V, 1.8V, and 3.3V
  • Standby power: <45uW, while monitoring cable detection
Detailed Product Information: