VGA

ANX6210

Converters/Bridges
DisplayPort
DisplayPort™ 1.2 to VGA Converter
Overview: 

ANX6210 is a DisplayPort to VGA converter designed for motherboards. With its single HRB2 lane, ANX6210 can support WDXGA (2048x1152) as its max resolution. Its on-chip MCU and memory eliminates the needs for any external configuration or setup. It automatically directs the DisplayPort output from the PC or mobile phone to VGA, effectively working with all types of legacy monitors, projectors, and TVs. ANX6210 supports a single 3.3V power supply with an integrated 1V low-dropout (LDO) regulator.

Main Features: 
VGA Output
  • Supports resolutions up to WDXGA (2048x1152@60Hz,24bpp)
  • VGA output meets VESA VSIS v1r2 clock jitter specification
  • VGA DAC work range is up to 270 MHz
  • Low power standby mode with automatic monitor plug and unplug detect
  • Powered from DisplayPort source
  • EDID and MCCS pass-through support
DisplayPort Input
  • DisplayPort 1.2 compliant receiver
  • VESA® compliant eDP v1.3 receiver
  • 1 lane high-speed differential input with configurable speed: 5.4Gbps, 2.7Gbps, or 1.62Gbps
Optimized for motherboard design
  • With 1.0 LDO on, single 3.3V power supply supported
  • Super low power consumption: 480mW active power (1080p@60Hz, 1V LDO powered on)
  • Standby power: 8mW with 1V LDO off
System Operation
  • -10°C to +75°C operating temperature
  • MCU controlling external components
Applications: 

汽车

笔记本/桌面PC

Package: 

5x5mm, 40-Pin QFN package

Standards Compliance: 

DisplayPort 1.2

eDP 1.3

Power Requirements: 
  • Single 3.3V power supply supported
Detailed Product Information: 

ANX9833

Display Converters (Adapters)
Display Converter (Adapter)
DisplayPort™ 1.2 to VGA Converter with OCM
Overview: 

ANX9833 is a DisplayPort to VGA adapter IC designed to connect a DisplayPort 1.2/1.1 source to a VGA display. With its on-chip MCU and memory, the ANX9833 does not require any external configuration or setup. It automatically directs DisplayPort output from adapters to VGA, effectively working with all types of legacy monitors, projectors, and TVs. ANX9833 provides Gbps bandwidth over two lanes to reach WUXGA (1920x1200) resolutions.

Main Features: 
VGA Output
  • Resolutions up to WUXGA (1920x1200@60Hz, 24bpp)
  • VGA output meets VESA VSIS v1r2 clock jitter specification
  • VGA DAC work range up to 270 MHz
  • Low power standby mode with automatic monitor plug and unplug detection
  • Getting power from DisplayPort source
  • EDID and MCCS pass-through support
DisplayPort Input
  • VESA® compliant DisplayPort 1.2 receiver
  • Two-lane high-speed differential input with configurable speed: 2.7Gbps or 1.62Gbps, total bandwidth up to 5.4Gbps
Optimized for VGA Adapters
  • Integrated MCU and EEPROM for added flexibility
  • Single 3.3V power supply or 3.3V/1.0V power supply supported
  • 5.0V power output for VGA DDC
  • Low BOM requirements
System Operation
  • Field upgradable through DP AUX or I2C
  • MCU can control external components
  • -10 to +75o operating temperature
Applications: 

配件

笔记本/桌面PC

Package: 
  • 6x6mm, 48 QFN (0.4mm pitch)
Standards Compliance: 

DisplayPort 1.2

Power Requirements: 
  • 600mW active power with all regulators active
  • Standby power: 12mW with 1V low-dropout (LDO) regulator off
Detailed Product Information: 

ANX6212

Converters/Bridges
DisplayPort
DisplayPort 1.2 to VGA converter with OCM
Overview: 

While VGA is losing its popularity in notebooks, there continues to be a need for VGA connections with its huge installed base of monitors, projectors, and TVs. The ANX6212, designed for motherboards, addresses this gap through the high performance DisplayPort to VGA converter of its kind. With its on-chip MCU and memory, the ANX6212 does not require any external configuration or setup. The ANX6212 automatically directs the DisplayPort output from the PC or mobile phone to VGA, effectively working with all types of legacy monitors, projectors, and TVs.

Main Features: 
VGA Output
  • Supports resolutions up to WQXGA (2560x1600@60Hz, 24bpp)
  • VGA output conforms to VESA® VSIS v1r2 clock jitter specification
  • VGA output pixel rate up to 270 MHz
  • Low power standby mode with automatic monitor plug and unplug detect
  • EDID and MCCS pass-through support
DisplayPort Input
  • VESA compliant DisplayPort 1.2 receiver
  • VESA compliant eDP v1.3 receiver
  • Two-lane high-speed differential input with configurable speed: 5.4Gbps, 2.7Gbps, or 1.62Gbps
Optimized for VGA Adapters
  • Integrated MCU and EEPROM for added flexibility
  • Single 3.3V power supply
  • 5.0V power output for VGA DDC
  • Minimum BOM requirements
System Operation
  • Under 350mW operation at WUXGA resolutions (no regulators)
  • Field upgradable through DP AUX or I2C
  • MCU can control external components
  • -10 to +75o C operating temperature
Applications: 

汽车

笔记本/桌面PC

Package: 
  • 6x6mm, 48 QFN (0.4mm pitch)
Standards Compliance: 

DisplayPort 1.2

eDP 1.3

Power Requirements: 
  • 600mW active power with all regulators active
  • Standby Power: 12mW with 1V low-dropout (LDO) regulator off
Detailed Product Information: 

ANX6211

Converters/Bridges
DisplayPort
DisplayPort 1.2 to VGA converter
Overview: 

The ANX6211 is a DisplayPort to VGA converter featuring low power consumption, high performance, and cost-effective. Designed for motherboards, the ANX6211 is optimized in terms of space, power, and performance for the next generation of CPUs. Analogix’s expertise in DisplayPort to VGA design ensures compatibility with all existing VGA displays.

Main Features: 
VGA Output
  • Supports resolutions up to WQXGA (2560x1600 @60Hz, 24bpp)
  • VGA output meets VESA VSIS v1r2 clock jitter specification
  • VGA output pixel rate up to 270 MHz
  • Low power standby mode with automatic monitor plug and unplug detect
  • EDID and MCCS pass-through support
  • DDC speed control for use with longer VGA cables
DisplayPort Input
  • VESA compliant DisplayPort 1.2 receiver
  • VESA compliant eDP v1.3 receiver
  • 2 lane high speed differential input with configurable speed: 5.4Gbps, 2.7Gbps, or 1.62Gbps
Power optimized for Ultra books
  • Under 350mW operation at WUXGA resolutions
  • 15mW standby power
  • DisplayPort HBR2 capability allows for single lane operation up to WUXGA. Saves 50mW of DP Tx power
  • 3.3V and 1.05V power requirements easily found on next generation motherboards. No need for external regulators, saving power, space, and cost.
Other Features
  • Minimum BOM requirements
  • Default settings changeable with I2C
  • -10 to +75C operating temperature
Applications: 

汽车

笔记本/桌面PC

Package: 
  • 7x7mm, 48 QFN (0.5mm pitch) package
Standards Compliance: 

DisplayPort 1.2

eDP 1.3

Power Requirements: 
  • 3.3V and 1.05V power requirements easily found on next generation motherboards.
Detailed Product Information: