6ch

ANX7625

Converters/Bridges
USB-C
MIPI-DSI/DPI to USB Type-C™ Bridge (Port Controller with MUX)
Overview: 

ANX7625 is a mobile HD transmitter designed for portable devices such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, and so on. It enables a mobile device to transfer audio, video, and data simultaneously. The ANX7625 converts MIPI™ to DisplayPort™ 1.3 high-performance video with the resolution up to 4K UHD. The built-in intelligent crosspoint switch provides support for USB Type-C, USB 3.1 data transfer, and the DisplayPort Alternate Mode signaling over USB Type-C. Additionally, its on-chip microcontroller (OCM) provides the capabilities to manage signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD), Vendor Defined Message (VDM) protocol, and other functions defined in the USB Type-C and USB Power Delivery specifications. Overall, the ANX7625 is designed as a single bridge IC between MIPI interface and USB 3.1 interface of the Application Processors to allow for a USB Type-C connector on mobile devices.

Main Features: 
  • Standard compliance
    • USB Type-C 1.2, DisplayPort 1.3, MIPI-DSI 1.3, MIPI-DPI 2.0, HDCP 2.2 and 1.4, USB-PD 3.0, VESA® DSC 1.1
  • Integrated USB Type-C support
    • USB3.1 Gen1 (5.0 Gbps)
    • DisplayPort Alternate Mode
    • Simultaneous USB 3.1 Gen1 (5.0 Gbps) and DisplayPort Alternate Mode
    • USB-PD 3.0 on CC wire
    • On-chip microcontroller to implement USB-PD messaging and DisplayPort related functions
  • DisplayPort transmitter
    • DisplayPort transmitter (2-lanes @ 6.75 Gbps)
    • Configurable 1-lane or 2-lane output supports: HBR2.5, HBR2, HBR, and RBR data rates
    • Video resolution supported: up to 4K (4096x2160p30) or Ultra-HD (3840x2160p30)
    • AUXP and AUXN support
    • HDCP2.2 and 1.4 support
  • Digital audio and video input
    • MIPI-DSI (4-lanes) at 1.5 Gbps/lane
    • MIPI-DPI 12-bit double data rate with the maximum pixel clock rates up to 150 Mpixels/sec
    • DSC with 3:1 or 2:1 compression ratio
    • I2S: up to 8-channel, 192 kHz digital audio support with TDM format
  • System operation
    • Reference input clock: 26 MHz and 27 MHz
    • Slave I2C device control interface
    • Built-in video BIST patterns and audio tone generator for system self-test
  • Power supply
    • 1.0V, 1.8V, and 3.0V
  • Package options: 64 VFBGA
Applications: 

Accessories

Notebook/Desktop PC

Smartphone/Tablet

Package: 
  • 64 VFBGA
Standards Compliance: 

DisplayPort 1.3 PHY and electrical specifications

MIPI-DSI 1.02

USB Power Delivery Specification v2.0 (rev 1.0)

USB Type-C Cable and Connector Specification (rev 1.1)

HDMI 1.2

HDCP

Power Requirements: 
  • 1.0V, 1.8V, and 3.0V
Detailed Product Information: 

ANX7688

Converters/Bridges
USB-C
HDMI to USB Type-CTM Bridge (Port Controller with MUX)
Overview: 

ANX7688 is an ultra-low power 4K Ultra-HD (4096x2160p60) mobile HD transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, etc. ANX7688 supports simultaneous audio, video, and data transfer from a mobile device. ANX7688 converts HDMITM 2.0 to DisplayPortTM 1.3 Ultra-HD (4096x2160p60) including an intelligent crosspoint switch to support USB Type-CTM (USB-CTM). The integrated crosspoint switch supports USB 3.1 data transfer along with the DisplayPort Alternate Mode signaling over USB Type-C. Additionally, an on-chip microcontroller (OCM) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD), Vendor Defined Message (VDM) protocol support and other functions as defined in the USB Type- C and USB Power Delivery specifications. Overall, the ANX7688 is designed as a single bridge IC from the HDMI2.0 and USB 3.1 interfaces of the Application Processors to enable a USB Type-C connector on mobile devices.

Main Features: 
  • Standard compliance
    • DisplayPort1.3, HDMI2.0/1.4b, HDCP2.2/1.4, USB PD 2.0
  • Integrated USB Type-C support  USB 2.0 (480Mbps)
    • USB3.1 Gen1 (5.0Gbps) 
    • DisplayPort Alternate Mode
    • Simultaneous USB 3.1 Gen1 (5.0Gbps) and DisplayPort Alternate Mode
    • USB-PD 2.0 on CC wire
    • On-chip microcontroller to implement USB-PD messaging and DisplayPort related functions 
  • DisplayPort transmitter
    • DisplayPort transmitter (2-lanes @6.75Gbps)
    • Configurable 1-lane or 2-lane output supports: HBR2.5, HBR2, HBR, and RBR data rate
    • Ultra-HD (3840x2160p60) or 4K (4096x2160p60) maximum video resolution
    • Stereo (3D) video output support
    • AUXP, AUXN, and HPD support
    • HDCP2.2 and HDCP1.4 support
  • HDMI 2.0 receiver
    • Supports max pixel clock rates up to 600 Mpixels/sec
    • Up to 36bpp color depth support
    • Up to Ultra-HD (3840x2160p60) or 4K (4096x2160p60) maximum video resolution
    • Up to 8-channels digital audio support
  • System operation
    • Reference input clock: 27MHz
    • Slave I2C device control interface
    • Built-in video BIST patterns and audio tone generator for system self-test
  • Power supply requirements
    • 1.0V, 1.8V, and 3.3V
    • Package options: VFBGA
Applications: 

Accessories

Notebook/Desktop PC

Smartphone/Tablet

Standards Compliance: 

DisplayPort 1.3 PHY and electrical specifications

HDMI 1.2

HDCP

Detailed Product Information: