DisplayPort 1.4

ANX7327

USB Type-C 4x6 DeMux
USB-C
USB Type-C™ Power Delivery v3.0 Controller with De-Mux (USB/DP)
Overview: 

ANX7327 is a USB-PD v3.0 port controller with an integrated de-mux that supports switching at data rates of up to 10Gbps. ANX7327 supports high-speed interfaces, such as USB 3.1 (Gen 1 – 5Gbps, Gen 2 – 10Gbps) and DisplayPort™ (DP) 1.4 at up to HBR3 (8.1Gbps). ANX7327 is designed to be placed behind a USB Type-C (USB-C™) receptacle of a USB-C accessory or HDTV or monitor USB-C port. The USB-C port with the embedded IC device behind it enables a passive USB-C cable connectivity between any USB-C source and the accessory or HDTV or monitor to further the USB-C functions to a display or data connectivity downstream. On the source side, when paired with a re-timer mux such as the ANX7440, the ANX7327/7440 combo solution can enable a USB-C full function port with CPUs that have integrated USB-C mux. An On-chip Microcontroller (OCM) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD) charging and Vendor Defined Message (VDM) protocol, and other functions, as defined in the USB Type-C v1.2 and USB Power Delivery v3.0 specifications. ANX7327 can be configured for an Upstream Facing Port (UFP) to support a USB-C receptacle. When paired with a DP-to-HDMI/VGA bridge (such as the ANX7737/9837), the ANX7327 creates an ideal solution for USB Type-C dongle, docking, HDTV, and monitor applications.

Main Features: 
Other key features
  • High-speed de-mux (4x6) switching up to 10Gbps
  • 4-lanes DisplayPort outputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, 6.75Gbps, and 8.1Gbps
  • USB 3.1 signal output (SSTX and SSRX) with Gen1 (5Gbps) and Gen2 (10Gbps) link speed
  • USB 1.1 Billboard support
  • DisplayPort Alternate Mode (SlimPort®) communication support through USB-PD structured VDM messaging
  • Native TCPC-compliant hardware register interface
  • Integrated VCONN FETs
  • Built-in 10-bit ADC to monitor VBUS voltage and current
  • Dedicated control signals for VBUS Source FET, VBUS sink FET, and VBUS auto discharge circuity
  • Serial and debug interfaces
    • Slave interface
  • Industry standard compatibility
    • USB Type-C r1.2 specification
    • USB Power Delivery v3.0 r1.0 specification
    • DisplayPort 1.4 specification
    • DisplayPort Alternate Mode over USB Type-C r1.1 specification
    • Universal Serial Bus (USB) Type-C Port Controller Interface r1.0 specification
  • Low-power design
    • Single supply at 3.3V
    • Dedicated supply power pin for flexible I/O power – 1.8V or 3.3V
    • Ultra-low power consumption (typical 80uW) in standby mode
  • On-chip Microcontroller (OCM) to implement signal switching, USB-PD messaging, and DisplayPort related functions
    • 64K bytes SRAM for firmware execution
    • 128K bytes Flash for firmware storage
    • PDFU function for firmware updating
  • Dead battery detection support
  • Package offered: 48-pin QFN, 6mm x 6mm, 0.8mm Z-height, pin-pitch: 0.4mm
Applications: 

Accessories

Display/Panel

Notebook/Desktop PC

Package: 
  • 48-pin QFN, 6mm x 6mm, 0.8mm Z-height, pin-pitch: 0.4mm
Detailed Product Information: 

ANX7496

Re-timers/Repeaters
USB-C
8.1G DisplayPort™ 4-lanes Re-timer
Overview: 

ANX7496 is a DisplayPort 4-lane re-timer capable of conditioning DP signals up to 8.1Gbps (supports HBR3, HBR2, HBR, RBR rates). ANX7496 can compensate signal loss of up to 27dB and can operate in either DP transparent mode or Link-Trainable Tunable PHY Repeater (LTTPR) mode. ANX7496 integrates the DP AUX signal pass-through and is protocol aware for better link power management and power savings. ANX7496 can be in various types of applications such as PCs, mobile, accessories, monitors, and VR HMDs with various connectors such as mini-DP, standard-DP, or even USB Type-C™ (USB-C™).

Main Features: 
Other key features
  • Built-in re-timers
    • Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps
    • Supports both transparent mode and non-transparent mode (transparent or LTTPR)
    • Loss compensation to recover up to 27dB channel loss
  • Integrated AUX pass-through
    • Integrated AUX detection for link training and protocol awareness for better link power management (LPM)
  • Reference clock for re-timer
    • Utilizes a 24MHz reference XTAL or 1.05V single-ended clock source
  • Serial and debug interfaces
    • I2C Slave interface, up to 1MHz, for re-timer configuration
  • Industry standard compatibility
    • DisplayPort 1.4 specification Low-power design
  • Low-power design
    • Analog power supply at 1.8V
    • Dedicated supply power pin for I/O power at 1.8V Packages
  • Commercial temperature range of 0C to 70C

Applications: 

Accessories

Notebook/Desktop PC

VR/AR

Notebooks, desktops, and 2-in-1s
Package: 
  • BGA-56, 4.0mm x 4.5mm, 0.5mm ball-pitch
  • QFN-60, 7.0mm x 7.0mm, 0.85mm Z-height, 0.4mm pin-pitch
Power Requirements: 
  • Low-power design
    • Analog power supply at 1.8V
    • Dedicated supply power pin for I/O power at 1.8V
Detailed Product Information: 

4L