10G Active Mux (6x4) with Integrated Re-timers for USB 3.1/DisplayPort™
Overview:
ANX7330 is a re-timing mux capable of switching DisplayPort (DP) and USB 3.1 Gen 2 10Gbps signals to support a single USB Type-C™ (USB-C™) port. ANX7330 has built-in re-timers to recover both the USB and DP signals with loss compensation of up to 27dB. ANX7330 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen1 and Gen2. SRIS re-timers eliminate jitter transfer and guarantee Gen2 operation. Digital muxing (6x4) is supported by ANX7330 to ensure the enhanced signals from the re-timers are preserved and outputted over the USB-C compatible interface. ANX7330 integrates the SBU/AUX mux for switching DP AUX signals and reducing overall system BOM cost.
ANX7330 is targeted for accessory side applications like docking stations, dongles, or other accessories that interface to the host side over a proprietary connector or a USB-C connector between the host and the accessory.
Main Features:
Built-in re-timers
Integrated re-timers for USB 3.1 up to Gen 2 @ 10Gbps and DisplayPort 1.4 up to HBR3 @ 8.1Gbps
USB3.1 Appendix E Specification compliant re-timer
Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB3.1 Specification (Appendix-E)
Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps. Supports transparent mode.
Loss compensation to recover up to 23dB channel loss (USB), up to 27dB (DP)
Integrated mux
Integrated (6x4) mux switches USB and DP signals and preserves enhanced signal output over USB-C connector
Mux control input through I2C commands from external I2C master (or, optionally through FLIP/OP_MODE pins)
Integrated SBU/AUX mux for switching DisplayPort AUX +/- signals
Reference clock for re-timers
Utilizes a 24MHz crystal or 1.05V swing single-ended clock source
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for mux and re-timer configuration
DCI debug interface support
Industry standard compatibility
USB 3.1 specification, Appendix E
DisplayPort 1.4 specification
USB Type-C r1.2 specification
Intel USB 3.1 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V
Dedicated 3.3V power for PULL_1 and PULL_2, DCI interface
Dedicated supply power pin for I/O power at 1.8V
Commercial temperature range of 0C to 70C
Package:
QFN-60, 7mm x 7mm, 0.85mm Z-height, 0.4mm pin-pitch
The ANX7816 is an ultra-low power Ultra-HD (4096x2160p30) SlimPort transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7816 works in conjunction with any MyDP/DisplayPort™ receiver, such as the ANX7730, ANX7732, and more. The ANX7816 transforms the HDMI output of an application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, an appropriate MyDP to DisplayPort cable can connect to any DisplayPort receiver. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.
Main Features:
USB Data In/Out
USB host, device or OTG data passes through by default
Meets Inter-Chip USB specification
SlimPort/MyDP/eDP/DisplayPort Transmitter
SlimPort output over mini- or micro-USB connector
DisplayPort, eDP, or MyDP output over any connector
Configurable 1-lane output supports: Turbo mode, HBR2, HBR, and RBR data rates
Ultra-HD (3840x2160p30) or 4K (4096x2160p30) maximum video resolution
Stereo (3D) video output support
Single wire (C-WIRE) sideband communication
Integrated remote control support
HDCP content protection
Integrated Analog Switch and Accessory Detection
Seamless switching between USB and MyDP
SlimPort cable detection with Fail-Safe mechanism
HDMI Receiver
Supports max pixel clock up to 300Mpixels/sec
Up to 36bpp color depth support at Full-HD
Up to 8 channels digital audio support
System Operation
Flexible ref clock: 19 MHz to 52 MHz
Slave I2C device control interface
Built-in video BIST for system self-test
Applications:
Accessories
Notebook/Desktop PC
Smartphone/Tablet
Package:
VFBGA 64-ball
Standards Compliance:
MyDP
RoHS Compliant and Halogen Free
HDMI
HDCP
DisplayPort
Power Requirements:
1.0V, 1.8V, and 3.3V
Standby power: <45uW, while monitoring cable detection
The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7814 works in conjunction with any MyDP/DisplayPort™ receiver, such as the ANX7730, ANX7732, and more. The ANX7814 transforms the HDMI output of an application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, an appropriate MyDP to DisplayPort cable can connect to any DisplayPort receiver. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.
Main Features:
USB Data In/Out
USB host, device or OTG data passes through by default
Meets Inter-Chip USB specification
SlimPort/MyDP/eDP/DisplayPort Transmitter
SlimPort output over 5-pin mobile USB connector
DisplayPort, eDP, or MyDP output over any connector
Configurable 1-lane output supports: Turbo mode, HBR2, HBR, and RBR data rates
Full-HD (1080p60) or WUXGA (1920x1200p60) maximum video resolution
Stereo (3D) video output support
Single wire (C-WIRE) sideband communication
Integrated remote control support
HDCP content protection
Integrated Analog Switch and Accessory Detection
Seamless switching between USB and MyDP
SlimPort cable detection with Fail-Safe mechanism
HDMI Receiver
Supports max pixel clock up to 185Mpixels/sec
Up to 36bppcolor depth support
Up to 8 channels digital audio support
System Operation
Flexible ref clock: 19MHz to 52MHz
Slave I2Cdevice control interface
Built-in video BIST for system self-test
Applications:
Accessories
Notebook/Desktop PC
Smartphone/Tablet
Package:
VFBGA
Standards Compliance:
MyDP
RoHS Compliant and Halogen Free
HDMI
HDCP
DisplayPort
Power Requirements:
1.0V, 1.8V, and 3.3V
Standby power: <45uW, while monitoring cable detection
The ANX7812 is an ultra-low power Full-HD (1080p60) SlimPort transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7812 works in conjunction with any MyDP/DisplayPort™ receiver, such as the ANX7730, ANX7732, and more. The ANX7812 transforms the HDMI output of an application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, an appropriate MyDP to DisplayPort cable can connect to any DisplayPort receiver. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.
Main Features:
USB Data In/Out
USB host, device or OTG data passes through by default
Meets Inter-Chip USB specification
SlimPort/MyDP/eDP/DisplayPort Transmitter
SlimPort output over 5-pin mobile USB connector
DisplayPort, eDP, or MyDP output over any connector
Configurable 1-lane output supports: Turbo mode, HBR2, HBR, and RBR data rates
Full-HD (1080p60) or WUXGA (1920x1200p60) maximum video resolution
Stereo (3D) video output support
Single wire (C-WIRE) sideband communication
Integrated remote control support
HDCP content protection
Integrated Analog Switch and Accessory Detection
Seamless switching between USB and MyDP
SlimPort cable detection with Fail-Safe mechanism
HDMI Receiver
Supports max pixel clock up to 185Mpixels/sec
Up to 36bppcolor depth support
Up to 8 channels digital audio support
System Operation
Flexible ref clock: 19MHz to 52MHz
Slave I2Cdevice control interface
Built-in video BIST for system self-test
Applications:
Accessories
Notebook/Desktop PC
Smartphone/Tablet
Package:
VFBGA 49-ball
Standards Compliance:
MyDP
RoHS Compliant and Halogen Free
HDMI
HDCP
DisplayPort
Power Requirements:
1.0V, 1.8V, and 3.3V
Standby power: <45uW, while monitoring cable detection
The ANX7808 is an ultra-low power SlimPort® transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7808 works in conjunction with MyDP/DisplayPort™ receivers, such as the ANX7730 and ANX7732. The ANX7808 transforms the HDMI output of the mobile device’s application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, a passive MyDP to DisplayPort cable can connect to any DisplayPort connector. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.
Main Features:
USB Data In/Out
USB host, device or OTG data passes through by default
Meets requirements of Inter-Chip USB specification
Digital Video and Audio Output
SlimPort output over mini or micro-USB connector
DisplayPort, eDP, or MyDP output over any connector
Configurable 1-lane output supports: 5.4Gbps, 2.7Gbps or 1.62Gbps data rates
Stereo (3D) video output support
Single Wire (C-WIRE) sideband communication
Integrated CEC Support
HDCP 1.3 content protection (optional)
Integrated Analog Switch
Seamless switching between USB and MyDP
SlimPort® Cable detect with FAIL-SAFE mechanism
HDMI Receiver Input
HDMI 1.4b standard compliant
Supports max pixel clock rates up to 185Mpixels/sec
30 bppcolor depth support in SlimPort mode
Up to 8 Channels audio support
System Operation
Slave I2C device control interface
Built-in video BIST patterns generator for system self-test
