ANX7491 is a 1-port USB 3.2 re-timer capable of conditioning USB signals at both Gen 1 (5Gbps) and Gen 2 (10Gbps) speeds. ANX7491 can compensate signal loss of up to 23dB and is compliant to the latest USB 3.2 specifications. ANX7491 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 operation. Host (source) and device (sink) Type-A data-only applications are fully supported by ANX7491. ANX7491 supports integrated reference clock and is protocol aware for efficient USB link power management and power savings. ANX7491 can be in various types of applications such as notebook/desktop PCs, server, and accessories/docks with various USB connectors such as Type-A or Type-B.
Main Features:
Other Features
Features
Built-in re-timer
Integrated re-timer for USB 3.2 1-port (Tx/Rx) up to 10Gbps
Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB3.1 Specification (Appendix-E)
Loss compensation to recover up to 23dB channel loss
Protocol awareness for better link power management (LPM) and savings
Supports both host and device applications in USB3.2 Type-A subsystems
Integrated Reference Clock
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for re-timer configuration
Industry standard compatibility
USB 3.2 specification, Appendix E
Intel USB 3.2 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V
I/O power supply at 1.8V
Core power supply at 1.2V
Package
QFN-36, 4.2mm x 4.9mm, 0.90mm Z-height, 0.35mm pin-pitch
Commercial temperature range of OC to 70C
Applications:
Notebook/Desktop PC
Package:
QFN-36, 4.2mm x 4.9mm, 0.90mm Z-height, 0.35mm pin-pitch
The ANX7816 is an ultra-low power Ultra-HD (4096x2160p30) SlimPort transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7816 works in conjunction with any MyDP/DisplayPort™ receiver, such as the ANX7730, ANX7732, and more. The ANX7816 transforms the HDMI output of an application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, an appropriate MyDP to DisplayPort cable can connect to any DisplayPort receiver. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.
Main Features:
USB Data In/Out
USB host, device or OTG data passes through by default
Meets Inter-Chip USB specification
SlimPort/MyDP/eDP/DisplayPort Transmitter
SlimPort output over mini- or micro-USB connector
DisplayPort, eDP, or MyDP output over any connector
Configurable 1-lane output supports: Turbo mode, HBR2, HBR, and RBR data rates
Ultra-HD (3840x2160p30) or 4K (4096x2160p30) maximum video resolution
Stereo (3D) video output support
Single wire (C-WIRE) sideband communication
Integrated remote control support
HDCP content protection
Integrated Analog Switch and Accessory Detection
Seamless switching between USB and MyDP
SlimPort cable detection with Fail-Safe mechanism
HDMI Receiver
Supports max pixel clock up to 300Mpixels/sec
Up to 36bpp color depth support at Full-HD
Up to 8 channels digital audio support
System Operation
Flexible ref clock: 19 MHz to 52 MHz
Slave I2C device control interface
Built-in video BIST for system self-test
Applications:
Accessories
Notebook/Desktop PC
Smartphone/Tablet
Package:
VFBGA 64-ball
Standards Compliance:
MyDP
RoHS Compliant and Halogen Free
HDMI
HDCP
DisplayPort
Power Requirements:
1.0V, 1.8V, and 3.3V
Standby power: <45uW, while monitoring cable detection
The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7814 works in conjunction with any MyDP/DisplayPort™ receiver, such as the ANX7730, ANX7732, and more. The ANX7814 transforms the HDMI output of an application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, an appropriate MyDP to DisplayPort cable can connect to any DisplayPort receiver. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.
Main Features:
USB Data In/Out
USB host, device or OTG data passes through by default
Meets Inter-Chip USB specification
SlimPort/MyDP/eDP/DisplayPort Transmitter
SlimPort output over 5-pin mobile USB connector
DisplayPort, eDP, or MyDP output over any connector
Configurable 1-lane output supports: Turbo mode, HBR2, HBR, and RBR data rates
Full-HD (1080p60) or WUXGA (1920x1200p60) maximum video resolution
Stereo (3D) video output support
Single wire (C-WIRE) sideband communication
Integrated remote control support
HDCP content protection
Integrated Analog Switch and Accessory Detection
Seamless switching between USB and MyDP
SlimPort cable detection with Fail-Safe mechanism
HDMI Receiver
Supports max pixel clock up to 185Mpixels/sec
Up to 36bppcolor depth support
Up to 8 channels digital audio support
System Operation
Flexible ref clock: 19MHz to 52MHz
Slave I2Cdevice control interface
Built-in video BIST for system self-test
Applications:
Accessories
Notebook/Desktop PC
Smartphone/Tablet
Package:
VFBGA
Standards Compliance:
MyDP
RoHS Compliant and Halogen Free
HDMI
HDCP
DisplayPort
Power Requirements:
1.0V, 1.8V, and 3.3V
Standby power: <45uW, while monitoring cable detection
The ANX7812 is an ultra-low power Full-HD (1080p60) SlimPort transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7812 works in conjunction with any MyDP/DisplayPort™ receiver, such as the ANX7730, ANX7732, and more. The ANX7812 transforms the HDMI output of an application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, an appropriate MyDP to DisplayPort cable can connect to any DisplayPort receiver. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.
Main Features:
USB Data In/Out
USB host, device or OTG data passes through by default
Meets Inter-Chip USB specification
SlimPort/MyDP/eDP/DisplayPort Transmitter
SlimPort output over 5-pin mobile USB connector
DisplayPort, eDP, or MyDP output over any connector
Configurable 1-lane output supports: Turbo mode, HBR2, HBR, and RBR data rates
Full-HD (1080p60) or WUXGA (1920x1200p60) maximum video resolution
Stereo (3D) video output support
Single wire (C-WIRE) sideband communication
Integrated remote control support
HDCP content protection
Integrated Analog Switch and Accessory Detection
Seamless switching between USB and MyDP
SlimPort cable detection with Fail-Safe mechanism
HDMI Receiver
Supports max pixel clock up to 185Mpixels/sec
Up to 36bppcolor depth support
Up to 8 channels digital audio support
System Operation
Flexible ref clock: 19MHz to 52MHz
Slave I2Cdevice control interface
Built-in video BIST for system self-test
Applications:
Accessories
Notebook/Desktop PC
Smartphone/Tablet
Package:
VFBGA 49-ball
Standards Compliance:
MyDP
RoHS Compliant and Halogen Free
HDMI
HDCP
DisplayPort
Power Requirements:
1.0V, 1.8V, and 3.3V
Standby power: <45uW, while monitoring cable detection
The ANX7808 is an ultra-low power SlimPort® transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, set top boxes, cradles, and adapters. ANX7808 works in conjunction with MyDP/DisplayPort™ receivers, such as the ANX7730 and ANX7732. The ANX7808 transforms the HDMI output of the mobile device’s application processor to MyDP or DisplayPort. External adapters can then convert MyDP or DisplayPort to HDMI, DVI, or to VGA so that the device can connect to any high-definition TV, monitor, or projector. Also, a passive MyDP to DisplayPort cable can connect to any DisplayPort connector. The mobile device’s USB connector functions as USB when a MyDP receiver is not connected.
Main Features:
USB Data In/Out
USB host, device or OTG data passes through by default
Meets requirements of Inter-Chip USB specification
Digital Video and Audio Output
SlimPort output over mini or micro-USB connector
DisplayPort, eDP, or MyDP output over any connector
Configurable 1-lane output supports: 5.4Gbps, 2.7Gbps or 1.62Gbps data rates
Stereo (3D) video output support
Single Wire (C-WIRE) sideband communication
Integrated CEC Support
HDCP 1.3 content protection (optional)
Integrated Analog Switch
Seamless switching between USB and MyDP
SlimPort® Cable detect with FAIL-SAFE mechanism
HDMI Receiver Input
HDMI 1.4b standard compliant
Supports max pixel clock rates up to 185Mpixels/sec
30 bppcolor depth support in SlimPort mode
Up to 8 Channels audio support
System Operation
Slave I2C device control interface
Built-in video BIST patterns generator for system self-test
