DisplayPort 1.2

ANX7750

Converters/Bridges
USB-C
SlimPort® to DisplayPort™ (4K@30Hz) Converter
Overview: 

The ANX7750 is a SlimPort to DisplayPort lane converter. It takes a 1-lane SlimPort (@HBR2.5 rate) input and converts it to 4-lane DisplayPort (@HBR rate) output. ANX7750 works in conjunction with SlimPort transmitters, such as ANX7805, ANX7808, ANX7812, ANX7814, ANX7816, ANX7836, and more. ANX7750 is particularly suited for seamless plug-and-play to legacy DisplayPort (@HBR rate) HDTV, monitors, and projectors.

Main Features: 
  • Standard compliance
    • DisplayPort, MyDP, HDCP
  • SlimPort/MyDP/DisplayPort receiver
    • 1-lane high-speed differential input with configurable speed: HBR2.5, HBR2, HBR, or RBR
    • Video up to 4K@30Hz resolution
    • Spread Spectrum Clocking (SSC) support
    • Stereo (3D) video input support  Single wire AUXP (C-WIRE) sideband communication
    • HDCP content protection
  • DisplayPort transmitter
    • 1-, 2-, or 4-lane high-speed differential output with configurable speed: HBR or RBR
    • Stereo (3D) video input support
    • HDCP content protection
  • System operation
    • Integrated On-chip Microcontroller (OCM) for software free operation
    • Slave I2C device control interface
  • Power requirements
    • 3.3V, 1.8V, and 1.0V
  • Package offered: 88-QFN, 0.4mm pin pitch
  • RoHS compliant and Halogen free package
Applications: 

Accessories

Standards Compliance: 

MyDP

HDCP

DisplayPort

Detailed Product Information: 

ANX9807

Converters/Bridges
RGB-24 to DP Converters
RGB to DisplayPortTM 1.2 Translator
Overview: 

ANX9807 is an ultra low power DP/eDP transmitter designed for motherboards. Any portable mobile device with an embedded ANX9807 device would be able to connect to any DP/eDP receiver through a passive cable as defined by DP/eDp specification. 

Main Features: 
  • Digital video input
    • 24-bits single data rate (SDR) or 18-bits double data rate (DDR) input video mode in LVCMOS
    • Pixel clock rate up to 270Mpixels/sec
    • Up to 36 bits per pixel video (DDR mode)
  • Digital video output
    • DisplayPort 1.2 output
    • Configurable 2 lanes, with each lane supports data rate of 5.4Gbps, 2.7Gbps, or 1.62Gbps
    • AUX channel link bandwidth up to 1Mbps
    • Resolution up to 2500*1600(WQXGA)@60Hz
  • System operation
    • Slave I2C control interface
    • 0°C to +75°C operating temperature  Power management
  • Power management 

    • 1.2V and 2.5V power supply

    • Standby power consumption lower than 15mW  Active power consumption lower than 210mW (QXGA)
    • Built-in video BIST patterns for system self-test  Package: 8 x 8 mm 81-ball BGA (0.8 pitch)
  • RoHS compliant and Halogen free package
  • Package: 8 x 8 mm 81-ball BGA (0.8 pitch)
  • RoHS compliant and Halogen free package 
Applications: 

Accessories

Notebook/Desktop PC

Standards Compliance: 

RoHS Compliant and Halogen Free

Detailed Product Information: 

4ch

ANX7805

Converters/Bridges
MIPI to DP Transmitters
SlimPort® Transmitter
Main Features: 
  • Standard compliance
    • DisplayPort 1.2, MyDP 1.0, MIPI-DSI 1.0
  • USB data in/out
    • USB host, device, or OTG data passes through by default
    • Meets requirements of inter-chip USB specification
  • Digital video and audio output
    • SlimPort output over mini- or micro-USB connector
    • DisplayPort, eDP, or MyDP output over any connector
    • Configurable 1-lane output supports: 5.4Gbps, 2.7Gbps, or 1.62Gbps data rates
    • Stereo (3D) video output support
    • Single wire (C-WIRE) sideband communication
    • Integrated CEC Support
    • HDCP 1.3 content protection (optional)
  • Integrated analog switch and accessory detect
    • Seamless switching between USB and MyDP
    • SlimPort cable detect with FAIL-SAFE mechanism
  • Digital video input
    • RGB-24 single data rate or 18-bits double data rate
    • MIPI-DSI (4-lanes) at 1Gbps/lane
    • Supports max pixel clock rates up to 185 Mpixels/sec
    • Up to 30 bpp color depth support in SlimPort mode
    • Supports 1.8V RGB-24 input mode
  • Digital audio input
    • SLIMbus, S/PDIF and 8-Ch I2S input
    • Audio sample rates 32 kHz to 192 kHz
  • System operation
    • Slave I2C device control interface
    • Built-in video BIST patterns and audio tone generator for system self-test
  • Power requirements
    • 1.0V, 1.8V, and 3.3V power supplies
    • Standby Power: < 25uW, while monitoring cable detect
  • Package offered: 81-ball, 4mm x 4mm, 0.4mm ball pitch 
Applications: 

Accessories

Notebook/Desktop PC

Smartphone/Tablet

Standards Compliance: 

MyDP 1.0

MIPI-DSI 1.0

DisplayPort 1.2

Detailed Product Information: 

1ch