20G Active Mux (2x2) with Integrated Re-timer and CC Detection for USB 3.2
Overview:
ANX7434 is a USB 3.2 Gen 2 20G active mux with integrated re-timer and CC Detection capable of recovering the USB signals with loss compensation of up to 23dB. ANX7434 specifically supports Gen 2x2 for USB Type-CTM (USB-CTM) applications. ANX7434 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 operation. Host (source) and device (sink) USB-C data-only applications are fully supported by ANX7434. With the integrated SRIS re-timer function and x2 USB support, ANX7434 ensures the enhanced signals from the re-timers are preserved and outputted over the USB-C connector.
Main Features:
Built-in re-timers
Integrated re-timer for USB 3.2 up to Gen 2 @ 2x10Gbps for a combined 20G data throughput
Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification (Appendix-E)
Supports both host (source) and device (sink) applications in USB-C subsystems
Loss compensation to recover up to 23dB channel loss
TCPC-compliant hardware interface
Supports DFP and UFP USB-C applications
Dedicated control signals for VBUS Source FET
Integrated Reference CLK
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for mux and re-timer configuration
Industry standard compatibility
USB 3.2 specification, Appendix E
USB Type-C r1.2 specification
Intel USB 3.2 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V
I/O power supply at 1.8V
Core power supply at 1.2V
Commercial temperature range of 0C to 70C
Applications:
Notebook/Desktop PC
Storage/Server
Package:
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
ANX7432 is a USB3.2 Gen2 20G active retimer capable of recovering the USB signals with loss compensation of up to 23dB. ANX7432 also integrates a mux to enable the following configurations: (Gen 1x2, Gen 2x1 and Gen 2x2) for USB Type-CTM (USB-CTM) applications. ANX7432 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 operation. Host (source) and device (sink) USB-C data-only applications are fully supported by ANX7432 with built-in intelligent switching. With the intelligent digital switching, ANX7432 ensures the enhanced signals from the re-timers are preserved and outputted over the USB-C connector.
Main Features:
Built-in re-timers
Integrated re-timer for USB 3.2 with two lanes up to Gen2 @ 10Gbps each for a combined 20G throughput
Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification
Supports both host (source) and device (sink) applications in USB-C subsystems
Loss compensation to recover up to 23dB channel loss
Integrated mux
Digital (2x2) mux switches USB signals and preserves enhanced signal output over USB-C connector
Mux control input through I2C commands from external I2C master (or, optionally through FLIP/USB_EN pins)
Integrated Reference CLK
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for mux and re-timer configuration
Industry standard compatibility
USB 3.2 specification
USB Type-C r1.2 specification
Intel USB 3.2 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V
I/O power supply at 1.8V
Core power supply at 1.2V
Commercial temperature range of 0C to 70C
Applications:
Notebook/Desktop PC
Storage/Server
Package:
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
QFN-60, 6.4mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
5G Active Mux (1x2) with Integrated Re-timer and CC Detection for USB 3.2
Overview:
ANX7423 is a USB 3.2 Gen1 5G active mux with integrated re-timer and CC Detection capable of recovering the USB signals with loss compensation of up to 23dB. ANX7423 also integrates a mux (1x2) for USB Type-C™ (USB-C™) applications. ANX7423 supports Bit-Level Re-timer (BLR) architectures for Gen 1. Host (source) USB-C data-only applications are fully supported by ANX7423 with built-in intelligent switching. With the intelligent digital switching, ANX7423 ensures the enhanced signals from the re-timers are preserved and outputted over the USB-C connector.
Main Features:
Built-in re-timers
Integrated re-timer for USB 3.2 up to Gen1 @ 5Gbps
Supports Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification (Appendix-E)
Loss compensation to recover up to 23dB channel loss
Integrated mux
Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector
Mux control input through I2C commands from external I2C master
Supports DFP USB-C applications
Dedicated control signals for VBUS Source FET
Integrated Reference CLK
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for mux and re-timer configuration
Industry standard compatibility
USB 3.2 specification, Appendix E
USB Type-C r1.2 specification
Intel USB 3.2 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V
I/O power supply at 1.8V
Core power supply at 1.2V
Commercial temperature range of 0C to 70C
Package:
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
QFN-60, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
ANX7433 is a USB 3.2 Gen2 10G active mux with integrated re-timer and CC Detection capable of recovering the USB signals with loss compensation of up to 23dB. ANX7433 also integrates a mux (1x2) for USB Type-C™ (USB-C™) applications. ANX7433 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 operation. Host (source) USB-C data-only applications are fully supported by ANX7433 with built-in intelligent switching. With the intelligent digital switching, ANX7433 ensures the enhanced signals from the re-timers are preserved and outputted over the USB-C connector.
Main Features:
Other Features
Built-in re-timer
Integrated re-timer for USB 3.2 up to Gen2 @ 10Gbps
Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification (Appendix-E)
Loss compensation to recover up to 23dB channel loss
Integrated mux
Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector
Mux control input through I2C commands from external I2C master
TCPC-compliant hardware interface
Supports DFP USB-C applications
Dedicated control signals for VBUS Source FET
Integrated Reference CLK
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for mux and retimer configuration
Industry standard compatibility
USB 3.2 specification, Appendix E
USB Type-C r1.2 specification
Intel USB 3.2 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V
I/O power supply at 1.8V
Core power supply at 1.2V
Package
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
ANX7497 is a DisplayPort 4-lane re-timer capable of conditioning DP signals up to 8.1Gbps (supports HBR3, HBR2, HBR, RBR rates). ANX7497 can compensate signal loss of up to 27dB and can operate in either DP transparent mode or Link-Trainable Tunable PHY Repeater (LTTPR) mode. ANX7497 integrates the DP Aux signal pass-through and is protocol aware for better link power management and power savings. ANX7497 integrates the local reference clock and AUX mux for switching DP AUX signals and reducing overall system BOM cost. ANX7497 can be deployed in various types of applications such as PCs, mobile, accessories, monitors, active cables and VR HMDs with various connectors such as mini-DP, standard-DP, or even USB Type-C™.
Main Features:
Other Features
Built-in re-timers
Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps. Supports both transparent mode and non-transparent mode (transparent or LTTPR)
Loss compensation to recover up to 27dB
Integrated AUX pass-through
Integrated AUX detection for link training and protocol awareness for better link power management (LPM)
Integrated reference clock
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for mux and re-timer configuration
Industry standard compatibility
DisplayPort 1.4a specification
Low-power design
Power supply at 1.8V
Core power supply at 1.2V
Package
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
Commercial temperature range of OC to 70C
Applications:
Accessories
Display/Panel
Notebook/Desktop PC
VR/AR
Package:
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
ANX7491 is a 1-port USB 3.2 re-timer capable of conditioning USB signals at both Gen 1 (5Gbps) and Gen 2 (10Gbps) speeds. ANX7491 can compensate signal loss of up to 23dB and is compliant to the latest USB 3.2 specifications. ANX7491 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 operation. Host (source) and device (sink) Type-A data-only applications are fully supported by ANX7491. ANX7491 supports integrated reference clock and is protocol aware for efficient USB link power management and power savings. ANX7491 can be in various types of applications such as notebook/desktop PCs, server, and accessories/docks with various USB connectors such as Type-A or Type-B.
Main Features:
Other Features
Features
Built-in re-timer
Integrated re-timer for USB 3.2 1-port (Tx/Rx) up to 10Gbps
Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB3.1 Specification (Appendix-E)
Loss compensation to recover up to 23dB channel loss
Protocol awareness for better link power management (LPM) and savings
Supports both host and device applications in USB3.2 Type-A subsystems
Integrated Reference Clock
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for re-timer configuration
Industry standard compatibility
USB 3.2 specification, Appendix E
Intel USB 3.2 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V
I/O power supply at 1.8V
Core power supply at 1.2V
Package
QFN-36, 4.2mm x 4.9mm, 0.90mm Z-height, 0.35mm pin-pitch
Commercial temperature range of OC to 70C
Applications:
Notebook/Desktop PC
Package:
QFN-36, 4.2mm x 4.9mm, 0.90mm Z-height, 0.35mm pin-pitch
10G Active Mux (1x2) with Integrated Re-timer for USB 3.2
Overview:
ANX7431 is a USB3.2 Gen2 10G active mux with integrated re-timer capable of recovering the USB signals with loss compensation of up to 23dB. ANX7431 also integrates a mux (lx2) for USB Type-C™ (USB-C™ ) applications. ANX7431 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 operation. Host (source) and device (sink) USB-C data-only applications are fully supported by ANX7431 with built-in intelligent switching. With the intelligent digital switching, ANX7431 ensures the enhanced signals from the re-timers are preserved and outputted over the USB-C connector.
Main Features:
Other Features
Features
Built-in re-timer
Integrated re-timer for USB 3.2 up to Gen2 @ 10Gbps
Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification (Appendix-El
Supports both host (source) and device (sink) applications in USB-C subsystems
Loss compensation to recover up to 23dB channel loss
Integrated mux
Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector
Mux control input through 12C commands from external 12C master (or, optionally through FLIP/USB_EN pins)
Integrated Reference CLK
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for mux and re-timer configuration
Industry standard compatibility
USB 3.2 specification, Appendix E
USB Type-C rl.2 specification
Intel USB 3.2 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V 1/0 power supply at 1.8V
Core power supply at 1.2V
Package
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
Commercial temperature range of OC to 70C
Applications:
Accessories
Notebook/Desktop PC
Package:
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
ANX7490 is a USB 3.1 1-port re-timer capable of conditioning USB signals at both Gen 1 (5Gbps) and Gen 2 (10Gbps) speeds. ANX7490 can compensate signal loss of up to -23dB and is compliant to the latest USB 3.1 specifications. ANX7490 is protocol aware for better link power management and power savings. ANX7490 can be in various types of applications such as notebook/desktop PCs, server, and accessories/docks with various USB connectors such as Type-A, Type-B, or even USB Type-CTM (USB-CTM).
Main Features:
Other key features
Built-in re-timers
Integrated re-timer for USB 3.1 1-port (Tx/Rx) up to 10Gbps
Loss compensation to recover up to 23dB channel loss
Protocol awareness for better link power management (LPM) and savings
Reference clock for re-timers
Utilizes a 24MHz reference XTAL or 1.05V single-ended clock source
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for re-timer configuration
DCI debug interface support
Industry standard compatibility
USB 3.1 specification, Appendix E
Intel USB 3.1 Repeater and Active Switch specification
ANX7496 is a DisplayPort 4-lane re-timer capable of conditioning DP signals up to 8.1Gbps (supports HBR3, HBR2, HBR, RBR rates). ANX7496 can compensate signal loss of up to 27dB and can operate in either DP transparent mode or Link-Trainable Tunable PHY Repeater (LTTPR) mode. ANX7496 integrates the DP AUX signal pass-through and is protocol aware for better link power management and power savings. ANX7496 can be in various types of applications such as PCs, mobile, accessories, monitors, and VR HMDs with various connectors such as mini-DP, standard-DP, or even USB Type-C™ (USB-C™).
Main Features:
Other key features
Built-in re-timers
Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps
Supports both transparent mode and non-transparent mode (transparent or LTTPR)
Loss compensation to recover up to 27dB channel loss
Integrated AUX pass-through
Integrated AUX detection for link training and protocol awareness for better link power management (LPM)
Reference clock for re-timer
Utilizes a 24MHz reference XTAL or 1.05V single-ended clock source
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for re-timer configuration
Industry standard compatibility
DisplayPort 1.4 specification Low-power design
Low-power design
Analog power supply at 1.8V
Dedicated supply power pin for I/O power at 1.8V Packages
Commercial temperature range of 0C to 70C
Applications:
Accessories
Notebook/Desktop PC
VR/AR
Notebooks, desktops, and 2-in-1s
Package:
BGA-56, 4.0mm x 4.5mm, 0.5mm ball-pitch
QFN-60, 7.0mm x 7.0mm, 0.85mm Z-height, 0.4mm pin-pitch
10G Active Mux (1x2) with Integrated Re-timer for U SB 3.1
Overview:
ANX7430 is a USB 3.1 Gen 2 10G active mux with integrated re-timer capable of recovering the USB signals with loss compensation of up to 23dB. ANX7430 also integrates a mux (1x2) for USB Type-C™ (USB-C™) applications. Digital muxing is supported by ANX7430 to ensure the enhanced signals from the re-timer are preserved and outputted over the USB-C connector.
Main Features:
Other key features
Built-in re-timers
Integrated re-timers for USB 3.1 up to Gen 2 @ 10Gbps
Loss compensation to recover up to 23dB channel loss
Integrated mux
Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector
Mux control input through I2C commands from external I2C master (or, optionally through FLIP/OP_MODE pins)
Reference clock for re-timers
Utilizes a 24MHz crystal or 1.05V swing single-ended clock source
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for mux and re-timer configuration
DCI debug interface support
Industry standard compatibility
USB 3.1 specification, Appendix E
USB Type-C r1.2 specification
Intel USB 3.1 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V
Dedicated 3.3V power for DCI interface
Dedicated supply power pin for I/O power at 1.8V
Packages
BGA-42, 3.5mm x 4.0mm, 0.5mm ball-pitch
QFN-48, 6mm x 6mm, 0.85mm Z-height, 0.4mm pin-pitch
QFN-60, 7mm x 7mm, 0.85mm Z-height, 0.4mm pin-pitch
Industrial temperature range of -40C to 85C
Applications:
Accessories
Notebook/Desktop PC
Storage/Server
Package:
BGA-42, 3.5mm x 4.0mm, 0.5mm ball-pitch
QFN-48, 6mm x 6mm, 0.85mm Z-height, 0.4mm pin-pitch
QFN-60, 7mm x 7mm, 0.85mm Z-height, 0.4mm pin-pitch
